![]() To update the firmware, click the “Firmware” button at the bottom, you should see a list of available firmware. Once connected, you will land on a new page where you can configure the Crossfire TX module. No need to power on your radio for this to work, the module gets power from USB.Īnd in Agent M, click “link USB device”, you will be prompted to connect to TBS Crossfire. If you don’t have a login, just register on TBS’s website ( ).Ĭonnect your Crossfire TX module to the computer using a USB cable. Login with the same account that you use on TBS’s website, username should be your email address. The online tool is called AgentM, it’s basically just a website: (Note: it only supports Google Chrome and Microsoft Edge browsers at the moment) The first thing you should do is to update the firmware on your Crossfire TX module for the latest features and bug fixes.īack in the days (before 2020), we had to download and install TBS Agent on our computers, but now we can use a web based tool to do flash firmware on our Crossfire module which is super handy. Make sure to update SD card content as well as it contains the latest Crossfire LUA script for configuring Crossfire module and receivers. OpenTX or EdgeTX) is up to date for bug fixes and improvements. – Same performance but stronger, and heavierĢg lighter than Immortal T and much smaller, great for micro drones, but range is largely reduced compared to full size antennaīefore we begin setting up Crossfire, it’s always a good idea to make sure your radio’s operating system (i.e. – Cheap, simple, lightweight and flexible Same capability as the Micro RX, but a lot smaller!ĭual antennas allows better range Additional features to existing RX – Slightly more directional, more range in front of the pilot than behind The only advantage IMO is having the 2W output power option, and I don’t remember a time I need more than 250mW :) TX Antennas Stock Antenna The additional features of the full size module are not really that useful to be honest for most pilots. The built-in screen in the full size module is no big deal as you can change pretty much all the settings in the radio. I think the Micro V2 module is more than capable for most people flying freestyle and racing. Same features and performance as the V2 JR module, but has Lite interface (for the Lite module bay such as the Jumper T-Lite, Frsky X-Lite and Tandem X20 radios)Ĭompact and great build quality and yet with excellent ergonomics. – No screen, settings changed via LUA script only – Extra features: Spectrum analyzer, Bluetooth module Crossfire TX Modules TBS Crossfire TX Module ![]() ![]() One of the main downsides of Crossfire is perhaps the larger receiver antennas which can be challenging to mount on smaller FPV drones. Range can largely depend on the conditions of the environment, but based on personal experience, I can fly 5 miles out easily using 250mW, and I wasn’t even pushing the limit there. Many pilots prefer Crossfire even though they don’t intent to fly long range but for the stable link connection and resistance to failsafe in challenging environment. The low frequency is better at signal penetration through obstacles. Rather than using the more common 2.4GHz, Crossfire operates on the 900MHz band. The TBS Tango 2 radio also has Crossfire built in. ![]() TBS Crossfire is a popular radio control link for FPV drones, which is known to be reliable, easy to setup and great for long range flying.Ĭrossfire is an external RF module that can be installed directly on the back of a radio transmitter (i.e. Setup Radio to Enable Crossfire TX Module.Installing Crossfire TX module in the Radio. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |